Products

PH010 064

PH010 064 - PH010 064

PH010 064 디스크 자석 모터는 시중의 다른 작은 직경의 스테퍼를 능가하는 탁월한 동적 성능을 제공합니다 독특하고 얇은 디스크 자석은 주어진 크기에서 미세한 스텝 해상도를 통해 기존 스테퍼보다 매우 높은 가속과 뛰어난 최고 속도를 가능하게 해줍니다.

모터 하이라이트

  • 정밀 - 마이크로스테핑에 매우 적합

  • 고속 - 디스크 자석을 사용하여 스텝 모터 중 가장 빠른 가속과 가장 높은 최고 속도를 보장하면서 정확한 위치 지정 유지

  • 독특함 - 낮은 디텐트 토크 및 매우 높은 맞춤형 옵션

  • 적응성 - 비슷한 직경의 스테퍼보다 회전당 높은 스텝 수

사용자 정의 가능

  • 소결 또는 볼 베어링
  • 다양한 권선
  • " 샤프트 수정 - 길이 증가/감소, 널 "
  • 긴 리드, 커넥터
  • 토크 증가용 기어박스
  • " 위치 확인을 위한 인코더"
  • 리드 스크류 샤프트

응용분야

사양 + 세부사항
리소스
미터 영어
Winding{%|%}unit PH010 064 020 02 PH010 064 010 02 PH010 064 003 02
Diameter{%|%}in 0.04 0.04 0.04
Diameter{%|%}mm 10 10 10
Nominal Voltage{%|%}V
Optimization (rpm)
No-Load Speed{%|%}rpm
Type
Resolution{%|%}line counts
Supply Voltage{%|%}V
Supply Current - typical{%|%}mA
Supply Current - maxium{%|%}mA
Supply Current - stand-by{%|%}μA
Rise time{%|%}ns
Fall time{%|%}ns
No-Load Current{%|%}mA
Max continuous mechanical power (@ 25°C)
Max continuous Current (A)
Max Continuous Torque (mNm)
Max Continuous Torque (oz-in)
Terminal Resistance{%|%}Ω 100.0 100.0 100.0
Output Power{%|%}W
Stall Torque{%|%}oz-in
Stall Torque{%|%}mNm
Efficiency{%|%}%
Speeds up to{%|%}rpm
Torque up to{%|%}oz-in
Torque up to{%|%}mNm
Current up to, thermal limits{%|%}Amp
Back-EMF Constant{%|%}V/1000 rpm
Torque Constant{%|%}mNm/A
Torque Constant{%|%}oz-in/A
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W)
Motor regulation k/R½ (oz-in/W)
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque{%|%}oz-in
Friction Torque{%|%}mNm
Rotor Inductance{%|%}µH
Mechanical Time Constant{%|%}ms
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm²
Thermal Resistance{%|%}C/W
Thermal Time Constant{%|%}C/W
Weight{%|%}oz 0.32 0.32 0.32
Weight{%|%}g 9.0 9.0 9.0
Absolute accuracy 2 ph. On, Full step mode (degree) +/- 5% +/- 5% +/- 5%
Ambient working temperature range (C) -20 to 53 -20 to 54 -20 to 55
Ambient working temperature range (F) -4 to 125 -4 to 126 -4 to 127
Bearing Type Ball Ball Ball
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC) 503 VRMS for 5 seconds 504 VRMS for 5 seconds 505 VRMS for 5 seconds
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH) 8.40 4.20 1.26
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C) 130 130 130
Maximum Coil Temperature (F) 266 266 266
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10% (Ohms) 19.00 10.00 3.00
Rotor Inertia (oz-in-sec²10{%SUP%}-6{%/SUP%}) 0.07 0.07 0.07
Electrical time constant (ms) 0.42 0.42 0.42
Max motor speed (rpm)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Max Axial Shaft Load (N) 2.5 2.5 2.5
Max Axial Shaft Load (oz) 9 9 9
Max Radial Shaft Load (N) 9 9 9
Max Radial Shaft Load (oz) 2.5 2.5 2.5
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Length (in)
Length (mm)
Steps per Revolution 24 24 24
Back EMF Amplitude (V/ksteps/s) 3.00 2.25 1.21
Nominal Phase Current (1 ph. On) (A) 0.21 0.28 0.52
Nominal Phase Current (2 ph. On) (A) 0.15 0.20 0.37
Angular Acceleration (nominal current) 343 775.00 343 775.00 343 775.00
Axial Shaft Play (µm) 40@2N 40@2N 40@2N
Holding Torque Typical (mNm) 2.40 2.40 2.40
Holding Torque Typical (oz-in) 0.34 0.34 0.34
Holding Torque, 1.5x nominal current (mNm) 3.60 3.60 3.60
Holding Torque, 1.5x nominal current (oz-in) 0.51 0.51 1.51
Natural Resonance Frequency @nominal current (Hz) 276 276 276
Power rate (nominal current) (kW/s) 0.50 0.50 0.50
Radial Shaft Play (µm) 30@2N 30@2N 30@2N
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Output signal{%|%}MHz
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Electrical phase shift{%|%}degree
Duty cycle{%|%}%
Maximum count frequency{%|%}kHz
Maximum speed @ 512 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Maximum speed @ 1024 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Operating Temperature Range: Rotor{%|%}°C
Operating Temperature Range: Motor{%|%}°C
Operating Temperature Range: Motor{%|%}°F
Operating Temperature Range: Rotor{%|%}°F
Code wheel moment of inertia{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Linear Travel Accuracy 15 15 15
Input Power (W)
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
PH010 064 drawing 디스크 자석 스테퍼 DXF 도면  
PH010 064 Specification Sheet 디스크 자석 스테퍼 사양 페이지  
PH010 064 3D Drawing 디스크 자석 스테퍼 3D