Products

21BF nuvoDisc

21BF nuvoDisc - 21BF nuvoDisc

21BF nuvoDisc 무브러시 DC 무슬롯 모터는 6개의 자립형 비철 코일을 이용합니다. 21BF 마이크로 모터는 오랜 수명, 탁월한 속도와 위치 제어 및 부드러운 회전을 제공합니다. 디스크 자석 설계를 사용하여 철 손실이 없고 납작한 모양입니다.

모터 하이라이트

  • 홀 센서 포함 또는 미포함

  • 무슬롯

  • 8개 폴

  • 콤팩트한 디자인

  • 철 손실 없음

  • 고 효율

  • 납작한 디자인

  • 3 상

사용자 정의 가능

  • 샤프트 길이
  • 특수 코일
  • 케이블 및 커넥터
  • 부가 가치 장착

응용분야

사양 + 세부사항
리소스
미터 영어
Winding{%|%}unit 21BF 3C K .02
Diameter{%|%}in 0.83
Diameter{%|%}mm 21
Nominal Voltage{%|%}V 5.0
Optimization (rpm) n.a.
No-Load Speed{%|%}rpm 3,900
Type
Resolution{%|%}line counts
Supply Voltage{%|%}V
Supply Current - typical{%|%}mA
Supply Current - maxium{%|%}mA
Supply Current - stand-by{%|%}μA
Rise time{%|%}ns
Fall time{%|%}ns
No-Load Current{%|%}mA 28.0
Max continuous mechanical power (@ 25°C) 4.00
Max continuous Current (A) 0.30
Max Continuous Torque (mNm) 2.70
Max Continuous Torque (oz-in) 0.38
Terminal Resistance{%|%}Ω
Output Power{%|%}W
Stall Torque{%|%}oz-in
Stall Torque{%|%}mNm
Efficiency{%|%}%
Speeds up to{%|%}rpm
Torque up to{%|%}oz-in
Torque up to{%|%}mNm
Current up to, thermal limits{%|%}Amp
Back-EMF Constant{%|%}V/1000 rpm 0.89
Torque Constant{%|%}mNm/A 8.5
Torque Constant{%|%}oz-in/A 1.20
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W) 1.10
Motor regulation k/R½ (oz-in/W) 0.16
Internal resistance - phase to phase (W) 56.30
Line to Line resistance at connectors (Ω) 56.30
Inductance - phase to phase (mH) 1.22
Friction Torque{%|%}oz-in
Friction Torque{%|%}mNm
Rotor Inductance{%|%}µH
Mechanical Time Constant{%|%}ms 141.2
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 1.800
Thermal Resistance{%|%}C/W 12
Thermal Time Constant{%|%}C/W 200
Weight{%|%}oz 0.35
Weight{%|%}g 10.0
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient working temperature range (C) -30 /+80
Ambient working temperature range (F) -22/+176
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10% (Ohms)
Rotor Inertia (oz-in-sec²10{%SUP%}-6{%/SUP%})
Electrical time constant (ms) 0.02
Max motor speed (rpm) 25 000
Ambient storage temperature range (C) -40/+80
Ambient storage temperature range (F) -40/+176
Ball bearings preload (N) 2.70
Axial static force without shaft support (N) 27
Max winding temperature (C) 125
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F) 257
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material Plastic
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Length (in) 0.42
Length (mm) 10.55
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Output signal{%|%}MHz
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Electrical phase shift{%|%}degree
Duty cycle{%|%}%
Maximum count frequency{%|%}kHz
Maximum speed @ 512 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Maximum speed @ 1024 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Operating Temperature Range: Rotor{%|%}°C
Operating Temperature Range: Motor{%|%}°C
Operating Temperature Range: Motor{%|%}°F
Operating Temperature Range: Rotor{%|%}°F
Code wheel moment of inertia{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Linear Travel Accuracy
Input Power (W)
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
21BF nuvoDisc Drawing 무브러시 DC DXF 도면  
21BF nuvoDisc Specification Sheet 무브러시 DC 사양 페이지  
21BF nuvoDisc 3D Drawing 무브러시 DC 3D