Products

관절경_셰이버_스테이플러_기어모터

Overview

관절경 셰이버/스테이플러 기어모터(24V)는 사이즈 6 브러시리스 DC 슬롯형 모터이며 고관절, 무릎 또는 어깨와 같은 관절 치료의 최소 침습형 수술 방법에 최적의 토크와 속도를 제공합니다. 수술 응용분야를 위한 Portescap 초소형 모터는 고온고압 처리 환경에서 높은 신뢰성을 제공하도록 설계되었습니다.

관절경_셰이버_스테이플러_기어모터 (B0614H4080) - 관절경_셰이버_스테이플러_기어모터

모터 하이라이트

  • 전동 수술 장치에 사용하도록 최적화됨

  • 500회 이상의 살균 주기가 필요한 응용분야를 위해 설계

  • 부드러운 조직과 뼈를 제거하는 데 최적화된 높은 토크와 속도

  • 저진동

  • 고효율

  • 작은 사이즈로 공구의 인체공학 향상

  • 6:1의 살균 유성 기어헤드 포함

  • 24V 공급 전압으로 설계 - 원하는 성능을 얻도록 다른 전압에서 사용 가능

Hide Reduce Design Time block (check box for SMS products only) 
기어 비율 
6:1
프로토타입 가격 
$473.51
살균 주기 
500
Need a prototype ASAP?

We stock a range of motors optimized for typical surgical applications to get your product development process started as soon as possible

사양 + 세부사항
리소스
미터 영어
Winding{%|%}unit B0614H4080
Diameter{%|%}in 0.64
Diameter{%|%}mm 17
Length{%|%}in 3.10
Length{%|%}mm 78.76
Nominal Voltage{%|%}Volt 24.0
Optimization Speed
No-Load Speed{%|%}rpm 4,082
Typical No-Load Current{%|%}mA 450
Max continuous mechanical power (@ 25°C){%|%}W
Max continuous Current{%|%}A
Max Continuous Torque{%|%}mNm 126.80
Max Continuous Torque{%|%}oz-in 18.00
Terminal Resistance{%|%}Ω
Output Power{%|%}W
Stall Torque{%|%}oz-in
Stall Torque{%|%}mNm
Efficiency{%|%}%
Speeds up to{%|%}rpm
Torque up to{%|%}oz-in
Torque up to{%|%}mNm
Current up to{%|%}thermal limits
Back-EMF Constant{%|%}V/1000 rpm 5.88
Torque Constant{%|%}mNm/A 50.54
Torque Constant{%|%}oz-in/A 7.16
Motor Regulation R/k²{%|%}10³/Nms 50.68
Motor Constant k/R½{%|%}mNm/W½ 389.0
Motor constant k/R½{%|%}oz-in/W½
Internal resistance - phase to phase{%|%}Ω
Line to Line resistance at connectors{%|%}Ω
Inductance - phase to phase{%|%}mH 0.16
Friction Torque{%|%}onz-in
Friction Torque{%|%}mNm
Rotor Inductance (mH)
Mechanical Time Constant{%|%}ms 2.2
Electrical time constant{%|%}ms 0.16
Max motor speed{%|%}rpm
Ambient working temperature range{%|%}°C
Ambient working temperature range{%|%}°F
Ambient storage temperature range{%|%}°C
Ambient storage temperature range{%|%}°F
Ball bearings preload{%|%}N
Axial static force without shaft support{%|%}N
Max Winding Temperature{%|%}°C
Max winding temperature{%|%}°C 155
Max Winding Temperature{%|%}°F
Max winding temperature{%|%}°F 311
Thermal Resistance{%|%}°C/W 12.5
Thermal Time Constant{%|%}s 950
Operating Temperature Range{%|%}°F
Weight{%|%}oz 3.74
Weight{%|%}g 106
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 12.6
Typical Housing Material
Hall Sensor Elecrical Phasing{%|%}electrical °
Absolute accuracy 2 ph. On, Full step mode (degree)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10%{%|%}Ohms 0.99
Rotor Inertia{%|%}oz-in-sec²10^-6 17.80
Continuous Stall Current{%|%}A 2.63
Peak Torque for 1s{%|%}mNm 1 197.00
Peak Torque for 1s{%|%}oz-in 169.60
Peak Current{%|%}A 2.63
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial{%|%}lb 19.17
Shaft Load Max Axial{%|%}N 85.27
Shaft Load Max Radial{%|%}lb 15.25
Shaft Load Max Radial{%|%}N 67.84
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%)oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Type of encoder
Linear Travel Accuracy
Input Power (W)
Stepper Type
Gear Ratio 6:1
Sterilization Cycles 500
Prototype Pricing $473.51
Winding{%|%}unit B0614H4080
Diameter{%|%}in 0.64
Diameter{%|%}mm 16.5
Nominal Voltage{%|%}Volt 24.0
Optimization (rpm)
Max No-Load Current{%|%}mA 450
No-Load Speed{%|%}rpm 4,082
Resistance - phase to phase{%|%}Ω
Continuous Stall Torque{%|%}mNm 126.8
Continuous Stall Torque{%|%}oz-in 18.00
Continuous Stall Current{%|%}A 2.63
Peak Torque for 1s{%|%}mNm 1 197.0
Peak Torque for 1s{%|%}oz-in 169.6
Peak Current{%|%}A 2.6
Stall Torque (oz-in)
Stall Torque (mNm)
Efficiency (%)
Speeds up to (rpm)
Torque up to (oz-in)
Torque up to (mNm)
Current up to (thermal limits)
Back-EMF Constant{%|%}V/1000 rpm 5.88
Torque Constant{%|%}mNm/A 50.54
Torque Constant{%|%}oz-in/A 7.16
Motor Regulation R/k²{%|%}10³/Nms 389.0
Motor Constant{%|%}mNm/W½ 50.7
Line to Line resistance at connectors (Ω)
Inductance - phase to phase{%|%}mH @1Khz 0.156
Thermal Resistance (winding to ambient){%|%}°C/W 12.5
Thermal Time Constant{%|%}s 950
Friction Torque (onz-in)
Friction Torque (mNm)
Rotor Inductance (mH)
Mechanical Time Constant{%|%}ms 2.15
Electrical time constant{%|%}ms 0.16
Max motor speed (rpm)
Ambient working temperature range (C)
Ambient working temperature range (F)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Operating Temperature Range (C)
Operating Temperature Range (F)
Rotor Inertia{%|%}kgm²10{%SUP%}-8{%/SUP%} 12.60
Rotor Inertia{%|%}oz-in-sec²10{%SUP%}-6{%/SUP%} 17.80
Max Winding Temperature{%|%}°C
Max winding temperature {%|%}°C 155
Max Winding Temperature{%|%}°F
Max winding temperature {%|%}°F 311
Shaft Load Max Axial{%|%}lb 19.2
Shaft Load Max Axial{%|%}N 85.3
Shaft Load Max Radial{%|%}lb 15.3
Shaft Load Max Radial{%|%}N 67.8
Weight{%|%}g 106.0
Weight{%|%}oz 3.74
Typical Housing Material
Hall Sensor Elecrical Phasing (degree)
Absolute accuracy 2 ph. On, Full step mode (degree)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10%{%|%}Ohms 0.99
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Type of encoder
Length{%|%}in 3.10
Length{%|%}mm 78.8
Linear Travel Accuracy
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
B0614H4080 Specification Page 무브러시 DC 사양 페이지  
B0614H4080 Drawing 무브러시 DC DXF 도면  
B0614H4080 3D Drawing 무브러시 DC 3D