Products

브러시 DC 하이 토크 모터

17DCT Athlonix - Precious Metal - 브러시 DC 하이 토크 모터

17DCT Athlonix - Precious Metal

Athlonix 17DCT 하이 토크 모터는 까다로운 응용 분야를 위해 맞춤 제작되었습니다. 이 브러시 DC 미니 모터는 최대 6.14mNm의 하이 토크를 제공하며 내부에 네오디뮴 자석(희토류 자석)을 포함하고 있습니다.

모터 하이라이트

  • 비철 구조

  • 네오디뮴 자석(희토류 자석)

  • 귀금속 정류

  • 콤팩트한 디자인

  • 권선 가능성

  • 전자장치부 부식을 줄여주는 REE 권선

사용자 정의 가능

  • 샤프트 길이
  • 특수 코일
  • 케이블 및 커넥터
  • 볼 베어링
  • 고정 홀

응용분야

사양 + 세부사항
리소스
미터 영어
Winding{%|%}unit 17DCT 26P1/P2 216P 17DCT 26P1/P2 211P 17DCT 26P1/P2 209P 17DCT 26P1/P2 208P 17DCT 26P1/P2 207P 17DCT 26P1/P2 209E 17DCT 26P1/P2 205P 17DCT 26P1/P2 107P 17DCT 26P1/P2 205E
Diameter{%|%}in 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67
Diameter{%|%}mm 17 17 17 17 17 17 17 17 17
Nominal Voltage{%|%}V 3.0 6.0 9.0 12.0 15.0 18.0 24.0 36.0 48.0
Optimization{%|%}rpm
No-Load Speed{%|%}rpm 7,838 7,842 7,645 8,158 8,358 8,030 8,350 9,800 8,145
Type
Resolution{%|%}line counts
Supply Voltage{%|%}V
Supply Current - typical{%|%}mA
Supply Current - maxium{%|%}mA
Supply Current - stand-by{%|%}μA
Rise time{%|%}ns
Fall time{%|%}ns
No-Load Current{%|%}mA 24.7 12.4 8.0 6.4 5.3 4.2 3.1 2.6 1.6
Max continuous mechanical power{%|%}@ 25°C
Max continuous Current{%|%}A
Max Continuous Torque{%|%}mNm
Max Continuous Torque{%|%}oz-in
Terminal Resistance{%|%}Ω 0.9 3.3 7.7 12.1 18.6 30.7 51.4 76.0 208.1
Output Power{%|%}W 4.6 4.7 4.8 4.7 4.7 4.5 4.8 4.7 4.6
Stall Torque{%|%}oz-in 1.74 1.87 1.84 1.95 1.93 1.75 1.93 2.33 1.81
Stall Torque{%|%}mNm 12.31 13.21 13.02 13.79 13.62 12.40 13.60 16.43 12.80
Efficiency{%|%}% 84 84 84 85 84 84 84 86 84
Speeds up to{%|%}rpm 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
Torque up to{%|%}oz-in 0.82 0.85 0.86 0.85 0.84 0.81 0.87 0.85 0.82
Torque up to{%|%}mNm 5.81 6.02 6.05 6.03 5.92 5.75 6.14 6.00 5.80
Current up to, thermal limits{%|%}Amp 1.63 0.84 0.55 0.44 0.35 0.27 0.21 0.17 0.11
Back-EMF Constant{%|%}V/1000 rpm 0.38 0.76 1.17 1.46 1.78 2.23 3.07 3.65 5.85
Torque Constant{%|%}mNm/A 3.6 7.3 11.2 14.0 17.0 21.3 29.3 34.9 55.9
Torque Constant{%|%}oz-in/A 0.51 1.03 1.58 1.98 2.41 3.01 4.15 4.94 7.91
Motor Regulation R/k²{%|%}10³/Nms
Motor regulation k/R½{%|%}mNm/W
Motor regulation k/R½{%|%}oz-in/W
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque{%|%}oz-in 0.011 0.011 0.011 0.011 0.011 0.011 0.011 0.011 0.011
Friction Torque{%|%}mNm 0.08 0.08 0.08 0.08 0.08 0.08 8.00 0.08 0.08
Rotor Inductance{%|%}µH
Mechanical Time Constant{%|%}ms 7.0 6.4 6.3 6.3 6.3 7.1 6.2 6.2 7.0
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 1.050 1.030 1.020 1.010 0.970 1.040 1.040 1.000 1.060
Thermal Resistance{%|%}C/W 6/25 6/25 6/25 6/25 6/25 6/25 6/25 6/25 6/25
Thermal Time Constant{%|%}C/W 12/250 12/250 12/250 12/250 12/250 12/250 12/250 12/250 12/250
Weight{%|%}oz 1.76 1.76 1.76 1.76 1.76 1.76 1.76 1.76 1.76
Weight{%|%}g 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient working temperature range (C)
Ambient working temperature range (F)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10% (Ohms)
Rotor Inertia (oz-in-sec²10{%SUP%}-6{%/SUP%})
Electrical time constant (ms)
Max motor speed (rpm)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Length (in)
Length (mm)
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Output signal{%|%}MHz
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Electrical phase shift{%|%}degree
Duty cycle{%|%}%
Maximum count frequency{%|%}kHz
Maximum speed @ 512 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Maximum speed @ 1024 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Operating Temperature Range: Rotor{%|%}°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C
Operating Temperature Range: Motor{%|%}°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C
Operating Temperature Range: Motor{%|%}°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F
Operating Temperature Range: Rotor{%|%}°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F
Code wheel moment of inertia{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Linear Travel Accuracy
Input Power (W)
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
17DCT PM Specification Sheet 브러시 DC 사양 페이지  
17DCT 26P Drawing 브러시 DC DXF 도면  
17DCT 26P1 3D Drawing 브러시 DC 3D  
17DCT 26P2 3D Drawing 브러시 DC 3D