Products

22DCP Athlonix - Graphite

22DCP Athlonix - Graphite - 22DCP Athlonix - Graphite

차세대 Athlonix 모터 - 22DCP Athlonix 브러시 DC 모터는 그라파이트 정류방식을 특징으로 합니다. 이 초소형 모터는 최대 6.21 mNm 의 토크를 전달할 수 있으며, 가성비가 탁월한 모터 입니다.

모터 하이라이트

  • 비철 구조

  • 알니코 자석

  • 그라파이트 브러시 정류

  • 긴 수명의 브러시

  • 콤팩트한 디자인

  • 권선 가능성

  • 전자 장치부 부식을 줄여주는 REE 권선

사용자 정의 가능

  • 샤프트 길이
  • 특수 코일
  • 케이블 및 커넥터
  • 볼 베어링
  • 고정 홀

응용분야

사양 + 세부사항
리소스
미터 영어
Winding{%|%}unit 22DCP 32G1 221P 1 22DCP 32G1 216P 1 22DCP 32G1 213P 1 22DCP 32G1 211P 1 22DCP 32G1 210P 1 22DCP 32G1 209P 1 22DCP 32G1 212E 1 22DCP 32G1 211E 1 22DCP 32G1 210E 1 22DCP 32G1 209E 1 22DCP 32G1 208E 1
Diameter{%|%}in 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87
Diameter{%|%}mm 22 22 22 22 22 22 22 22 22 22 22
Nominal Voltage{%|%}V 3.0 6.0 9.0 12.0 15.0 18.0 21.0 24.0 30.0 36.0 48.0
Optimization{%|%}rpm
No-Load Speed{%|%}rpm 8,094 9,574 9,874 9,598 9,600 9,211 10,201 10,308 10,645 10,123 10,889
Type
Resolution{%|%}line counts
Supply Voltage{%|%}V
Supply Current - typical{%|%}mA
Supply Current - maxium{%|%}mA
Supply Current - stand-by{%|%}μA
Rise time{%|%}ns
Fall time{%|%}ns
No-Load Current{%|%}mA 132.6 77.4 53.0 38.7 30.9 24.8 23.5 20.8 17.2 13.6 11.0
Max continuous mechanical power{%|%}@ 25°C
Max continuous Current{%|%}A
Max Continuous Torque{%|%}mNm
Max Continuous Torque{%|%}oz-in
Terminal Resistance{%|%}Ω 0.9 2.2 4.3 7.9 12.3 18.8 23.6 30.6 46.3 71.9 112.8
Output Power{%|%}W 2.2 3.7 4.1 4.0 4.0 3.8 4.0 4.1 4.2 3.9 4.3
Stall Torque{%|%}oz-in 1.48 2.21 2.44 2.42 2.45 2.40 2.34 2.34 2.34 2.28 2.41
Stall Torque{%|%}mNm 10.44 15.60 17.23 17.10 17.29 16.94 16.56 16.53 16.53 16.09 17.00
Efficiency{%|%}% 63 69 71 71 71 70 70 70 70 70 70
Speeds up to{%|%}rpm 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
Torque up to{%|%}oz-in 0.73 0.82 0.86 0.86 0.87 0.88 0.82 0.82 0.80 0.81 0.81
Torque up to{%|%}mNm 5.13 5.82 6.04 6.11 6.14 6.21 5.81 5.77 5.67 5.74 5.69
Current up to, thermal limits{%|%}Amp 1.64 1.08 0.77 0.56 0.45 0.37 0.33 0.29 0.23 0.19 0.15
Back-EMF Constant{%|%}V/1000 rpm 0.36 0.61 0.89 1.22 1.52 1.90 2.00 2.27 2.74 3.46 4.29
Torque Constant{%|%}mNm/A 3.4 5.8 8.5 11.6 14.5 18.2 19.1 21.6 26.2 33.0 41.0
Torque Constant{%|%}oz-in/A 0.48 0.82 1.20 1.65 2.06 2.57 2.71 3.07 3.71 4.68 5.81
Motor Regulation R/k²{%|%}10³/Nms
Motor regulation k/R½{%|%}mNm/W
Motor regulation k/R½{%|%}oz-in/W
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque{%|%}oz-in 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064
Friction Torque{%|%}mNm 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45
Rotor Inductance{%|%}µH
Mechanical Time Constant{%|%}ms 39.0 30.7 28.4 27.5 27.1 26.9 30.3 30.2 30.1 30.1 30.0
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 4.800 4.780 4.740 4.680 4.660 4.720 4.700 4.630 4.470 4.560 4.480
Thermal Resistance{%|%}C/W 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22
Thermal Time Constant{%|%}C/W 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550
Weight{%|%}oz 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05
Weight{%|%}g 58.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient working temperature range (C)
Ambient working temperature range (F)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10% (Ohms)
Rotor Inertia (oz-in-sec²10{%SUP%}-6{%/SUP%})
Electrical time constant (ms)
Max motor speed (rpm)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Length (in)
Length (mm)
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Output signal{%|%}MHz
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Electrical phase shift{%|%}degree
Duty cycle{%|%}%
Maximum count frequency{%|%}kHz
Maximum speed @ 512 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Maximum speed @ 1024 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Operating Temperature Range: Rotor{%|%}°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C
Operating Temperature Range: Motor{%|%}°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C
Operating Temperature Range: Motor{%|%}°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F
Operating Temperature Range: Rotor{%|%}°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F
Code wheel moment of inertia{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Linear Travel Accuracy
Input Power (W)
Input Power (W)
Stepper Type