Products

DM 고속 스테퍼 모터

P532 EN - DM 고속 스테퍼 모터

P532 EN

Portescap 디스크 자석 모터는 시중의 다른 작은 직경의 스테퍼를 능가하는 탁월한 동적 성능을 제공합니다 독특하고 얇은 디스크 자석은 주어진 크기에서 미세한 스텝 해상도를 통해 기존 스테퍼보다 매우 높은 가속과 뛰어난 최고 속도를 가능하게 해줍니다.

이러한 고속 스테퍼 모터는 스테퍼의 정밀도와 무브러시 DC 모터의 가속을 요구하는 응용분야에 적합합니다. 루프를 닫으면 서보 솔루션에 비해 경쟁력이 있습니다.

모터 하이라이트

  • 정밀 - 마이크로스테핑에 매우 적합

  • 고속 - 디스크 자석을 사용하여 스텝 모터 중 가장 빠른 가속과 가장 높은 최고 속도를 보장하면서 정확한 위치 지정 유지

  • 독특함 - 낮은 디텐트 토크 및 매우 높은 맞춤형 옵션

  • 적응성 - 비슷한 직경의 스테퍼보다 회전당 높은 스텝 수

사용자 정의 가능

  • 소결 또는 볼 베어링
  • 다양한 권선
  • 샤프트 수정 - 길이 증가/감소, 널
  • 긴 리드, 커넥터
  • 토크 증가용 기어박스
  • 위치 확인을 위한 인코더
  • 리드 스크류 샤프트

응용분야

Hide Reduce Design Time block (check box for SMS products only) 
사양 + 세부사항
리소스
미터 영어
Winding{%|%}unit P532 0.7 137 HEDS 5540 A14 P532 004 137 HEDS 5540 A14 (parallel) P532 004 137 HEDS 5540 A14 P532 012 137 HEDS 5540 A14
Diameter{%|%}in 2.05 2.05 2.05 2.05
Diameter{%|%}mm 52 52 52 52
Length{%|%}mm
Length{%|%}in
Operating Voltage (VDC)
Resistance per Phase, ± 10%{%|%}Ohms 0.3 2.2 8.8 27.0
Inductance per Phase, typ{%|%}mH 0.7 5.0 20.0 64.0
Nominal Phase Current, 2 ph. On{%|%}A 3.70 1.40 0.70 0.40
Nominal Phase Current, 1 ph. On{%|%}A 5.20 2.00 1.00 0.56
Back-EMF Constant{%|%}V/1000 rpm
Back EMF Amplitude{%|%}V/ksteps/s 2.3 6.0 12.0 21.0
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Holding Torque, Typical{%|%}mNm 215.0 215.0 215.0 215.0
Holding Torque, Typical{%|%}oz-in 30.30 30.30 30.30 30.30
Holding Torque, 1.5x nominal current{%|%}mNm 370.0 370.0 370.0 370.0
Holding Torque, 1.5x nominal current{%|%}oz-in 52.40 52.40 52.40 52.40
Detent Torque, Typical{%|%}mNm 45.00 45.00 45.00 45.00
Detent Torque, Typical{%|%}oz-in 6.40 6.40 6.40 6.40
Rated Current per Phase, 1 Phase ON (A)
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Rotor Inertia{%|%}kgm²10{%SUP%}-7{%/SUP%} 13.00 13.00 13.00 13.00
Rotor Inertia{%|%}oz-in-sec²10{%SUP%}-3{%/SUP%} 710.77 710.77 710.77
Nominal Voltage (Volt)
Optimization (rpm)
No-Load Speed (rpm)
No-Load Current (mA)
Max continuous mechanical power (@ 25°C)
Max continuous Current (A)
Max Continuous Torque (mNm)
Max Continuous Torque (oz-in)
Terminal Resistance (W)
Output Power (W)
Stall Torque (oz-in)
Stall Torque (mNm)
Efficiency (%)
Speeds up to (rpm)
Torque up to (oz-in)
Torque up to (mNm)
Current up to (thermal limits)
Torque Constant (mNm/A)
Torque Constant (oz-in/A)
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W)
Motor regulation k/R½ (oz-in/W)
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque (onz-in)
Friction Torque (mNm)
Rotor Inductance (mH)
Mechanical Time Constant (ms)
Thermal Time Constant (C/W)
Absolute accuracy 2 ph. On, Full step mode{%|%}% +/- 5% +/- 5% +/- 5% +/- 5%
Steps per Revolution 100 100 100 100
Ambient Temperature Range (°C)
Operating Temperature Range (°F)
Rotor Operating Temperature Range (°C)
Rotor Operating Temperature Range (°F)
Ambient temperature range (operating){%|%}°C -20 to 50 -20 to 50 -20 to 50 -20 to 50
Ambient temperature range (operating){%|%}°F -4 to 122 -4 to 122 -4 to 122 -4 to 122
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Max motor speed (rpm)
Ambient storage temperature range (°C)
Ambient storage temperature range (°F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Maximum Coil Temperature{%|%}°C 130 130 130 130
Maximum Coil Temperature{%|%}°F 266 266 266 266
Thermal Resistance{%|%}°C/W 7.3 7.3 7.3 7.3
Natural Resonance Frequency @nominal current{%|%}Hz 350 350 350 350
Electrical time constant{%|%}ms 1.5 1.5 1.5 1.5
Angular Acceleration (nominal current){%|%}rad/s2 195,000 195,000 195,000 195,000
Bearing Type Ball Ball Ball Ball
Dielectric Withstanding Voltage{%|%}VAC 500 VRMS for 5 seconds 500 VRMS for 5 seconds 500 VRMS for 5 seconds 500 VRMS for 5 seconds
Radial Shaft Play{%|%}µm 25@5N 25@5N 25@5N 25@5N
Axial Shaft Play{%|%}µm 25@5N 25@5N 25@5N 25@5N
Max Radial Shaft Load{%|%}oz 72 72 72 72
Max Radial Shaft Load{%|%}N 20 20 20 20
Max Axial Shaft Load{%|%}oz 108 108 108 108
Max Axial Shaft Load{%|%}N 30 30 30 30
Weight{%|%}g 260.0 260.0 260.0 260.0
Weight{%|%}oz 9.2 9.2 9.2 9.2
Type of encoder
Power rate, nominal current{%|%}kW/s 35.0 35.0 35.0 35.0
Linear Travel Accuracy 3.6 3.6 3.6 3.6
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
P532 EN Specification Sheet 디스크 자석 스테퍼 사양 페이지  
P532 EN drawing 디스크 자석 스테퍼 DXF 도면  
P532 EN 3D Drawing 디스크 자석 스테퍼 3D  
Introducting P532 Disc Magnet Motor: Best in Class Power Rate/Acceleration (press release: FR) 디스크 자석 스테퍼 보도 자료  
Introducting P532 Disc Magnet Motor: Best in Class Power Rate/Acceleration (press release: KOR) 디스크 자석 스테퍼 보도 자료  
About Disc Magnet Motors (brochure) 디스크 자석 스테퍼 문헌  
Disc Magnet Motors (brochure) 디스크 자석 스테퍼 문헌  
Disc Magnet Stepper Speed vs. Torque Curves specifications 디스크 자석 스테퍼 사양 페이지